FS 2007 SV1000S racer/track with all street parts

SuperDave · 10-18-2007, 10:13 AM

This is my championship winning 2007 Suzuki SV1000S

I purchased this bike new to race and use in schools.

It's been modified simply and carefully so that it's a really fun and reliable package. I was capable of turning lap times in the 1:12 range at Blackhawk Farms Raceway with the early set up, low 1:50's at HPT, 1:47's at Brainerd, 1:37's at MAM, 1:09's at Gateway, and 1:32's at Road Atlanta, and I won three championships with it while winning races in Supertwins in CCS and in the CRA and finishing second in some Heavyweight Superbike races. We made some recent modifications to the forks that improved handling, and I had the OEM fuel injection modifiedusing a Factory Pro Teka SFI at 4&6 Racing. The result was 115 to 119 HP depending upon what fuel we were using at the Suzuki Cup Final. Torque is very consistent at around 60+ ftlbs of torque pretty much everywhere.

-520 chain conversion with sprockets: 17, 39, 40, 41, 42, 43
-Front and rear steel braided brake lines, clutch line not installed, but it is with the bike
-Hyperpro rear shock featuring adjustable ride height, high & low speed compression dampening, and rebound dampening.
-two extra rear wheels - all have lightened rotors. Extra sprocket carrier included
-extra front wheel with rotors
-Forks have been gone through by 4&6 Racing and feature Hyperpro springs and a special set of fork extenders that allow an extra 17mm of fork height adjustment.
-BMC air filter
-Tank risers
-extra set of racing bodywork
-M4 Full Race System with carbon can
-Extra OEM clip ons
-Timing Retard Eliminator
-Woodcraft rear sets with extra footpegs
-Woodcraft three piece levers for brake and shift lever
-Woodcraft frame sliders
-Spare clutch and front brake levers
-Factory Pro EVO Shift STAR Kit
-Factory Pro 4 degree ignition advancer

All unmolested OEM bodywork is included. Upper, lower, tail, exhaust, tank, etc.

I have other stuff too, including the an extra tank that has been modified with a dry break for MotoST endurance racing. It has it's own fuel pump with it.

Pictures are of me leading the SV1000 Suzuki Cup Final on #26, and the other picture is of the bike in it's as purchased street condition.

Whole package for $7700.

Contact me via email at superdave@visionsportsridingschools.com or you can try my phone at 262-391-0012. You might leave me a message on that number as sometimes my hearing is a little strange over a phone line at times.

I look forward to talking to you.

SuperDave · 10-20-2007, 03:54 PM

I've placed some pictures on one of my websites.
Super Dave's Race Against Childhood Cancer

When I get back, I'll unload my trailer more completely, and I'll take pictures of more of the spare pieces that I have...or take more pictures of things that are requested.

10-18-2007, 10:13 AM	#1
SuperDave Member #300 Join Date: 02-27-2007 Location: WI Bike(s): XB12R, TTR125, H1 Posts: 258	FS 2007 SV1000S racer/track with all street parts This is my championship winning 2007 Suzuki SV1000S I purchased this bike new to race and use in schools. It's been modified simply and carefully so that it's a really fun and reliable package. I was capable of turning lap times in the 1:12 range at Blackhawk Farms Raceway with the early set up, low 1:50's at HPT, 1:47's at Brainerd, 1:37's at MAM, 1:09's at Gateway, and 1:32's at Road Atlanta, and I won three championships with it while winning races in Supertwins in CCS and in the CRA and finishing second in some Heavyweight Superbike races. We made some recent modifications to the forks that improved handling, and I had the OEM fuel injection modifiedusing a Factory Pro Teka SFI at 4&6 Racing. The result was 115 to 119 HP depending upon what fuel we were using at the Suzuki Cup Final. Torque is very consistent at around 60+ ftlbs of torque pretty much everywhere. -520 chain conversion with sprockets: 17, 39, 40, 41, 42, 43 -Front and rear steel braided brake lines, clutch line not installed, but it is with the bike -Hyperpro rear shock featuring adjustable ride height, high & low speed compression dampening, and rebound dampening. -two extra rear wheels - all have lightened rotors. Extra sprocket carrier included -extra front wheel with rotors -Forks have been gone through by 4&6 Racing and feature Hyperpro springs and a special set of fork extenders that allow an extra 17mm of fork height adjustment. -BMC air filter -Tank risers -extra set of racing bodywork -M4 Full Race System with carbon can -Extra OEM clip ons -Timing Retard Eliminator -Woodcraft rear sets with extra footpegs -Woodcraft three piece levers for brake and shift lever -Woodcraft frame sliders -Spare clutch and front brake levers -Factory Pro EVO Shift STAR Kit -Factory Pro 4 degree ignition advancer All unmolested OEM bodywork is included. Upper, lower, tail, exhaust, tank, etc. I have other stuff too, including the an extra tank that has been modified with a dry break for MotoST endurance racing. It has it's own fuel pump with it. Pictures are of me leading the SV1000 Suzuki Cup Final on #26, and the other picture is of the bike in it's as purchased street condition. Whole package for $7700. Contact me via email at superdave@visionsportsridingschools.com or you can try my phone at 262-391-0012. You might leave me a message on that number as sometimes my hearing is a little strange over a phone line at times. I look forward to talking to you. Attached Thumbnails __________________ Super Dave Rosno Super Dave's Race Against Childhood Cancer Visionsports Riding Schools - Team Visionsports' Racing You can sign up for my email newsletters here... Last edited by SuperDave; 10-19-2007 at 04:17 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Championship-winning Race Mechanic Lombardo Goes To Work For Kawasaki Motors U.S.A.,	Paperboy	Roadracingworld	0	10-04-2007 03:10 PM
Championship-winning Race Mechanic Lombardo Goes To Work For Kawasaki Motors U.S.A.,	Paperboy	Roadracingworld	0	10-04-2007 11:00 AM
Parts Canada Superbike Championship To Be Decided This Weekend At Shannonville	Paperboy	Roadracingworld	0	08-29-2007 05:30 PM
Parts Canada Superbike Championship Gets Another Sponsor	Paperboy	Roadracingworld	0	05-30-2007 02:43 AM
Parts Canada Superbike Championship Gets New Sponsor	Paperboy	Roadracingworld	0	05-29-2007 10:21 PM

10-20-2007, 03:54 PM	#2
SuperDave Member #300 Join Date: 02-27-2007 Location: WI Bike(s): XB12R, TTR125, H1 Posts: 258	Re: FS 2007 SV1000S racer/track with all street parts I've placed some pictures on one of my websites. Super Dave's Race Against Childhood Cancer When I get back, I'll unload my trailer more completely, and I'll take pictures of more of the spare pieces that I have...or take more pictures of things that are requested. __________________ Super Dave Rosno Super Dave's Race Against Childhood Cancer Visionsports Riding Schools - Team Visionsports' Racing You can sign up for my email newsletters here...